1967 - 1969 Camaro Control A-Arm Set (DSE), Lower, Tubular, Coilover Spring Pockets, Pair

Home > Suspension >

1967 - 1969 Coilover Shocks for DSE Lower A-arms

Alternative Views:

PART NUMBER: SUS-347C

DISCONTINUED

Description

Extended Information

The Detroit Speed coilover kit is designed to convert your stock front subframe to a true coilover shock/spring. Additionally, it provides a new upper control arm mounting plate that is relocated to a new position to improve geometry by raising the front roll center.

The Coilover Conversion Bracketry kit includes:

• Upper control arm mounting plates that include upper coilover mount brackets
• Stamped steel rings that trim the pass-through of the coilover shock through the subframe
• Fasteners
• Fixture to locate the new upper control arm brackets in position

All brackets are laser cut. The brackets are completely TIG welded in fixtures for precise and repeatable locating. The upper and lower coilover mounts are positioned so that lower ride heights can be obtained without sacrificing ride travel, based on a 4" stroke shock. This conversion allows you to easily adjust ride height and spring rate to suit your driving needs.

This kit includes all the necessary brackets and hardware; as well as, step-by-step installation instructions and photos.

Note: $40 will be refunded if the fixture is returned to Detroit Speed after use. Call for RGA # to return.

These are made to be used with DSE Coil Over Shock Set SUS-347B . Also these are made to be used with SUS-347 A-arms and SUS-347C Coil Springs. Order springs part# SUS-857 or SUS-858.

PART NUMBER: SUS-347C