For your 1967-1969 Camaro model, QA1 offers its Pro Coil System with single adjustable shocks for the daily driver.  Compression and rebound adjustment is made easy with one easy-to-reach knob for simultaneous adjustment.  With 18 valving options, you’re able to fine tune your suspension for the ride you’re looking for.  

Kit includes:
- (2) QA1 High Performance Shocks
- (2) Specially Designed Springs
- All Mounting Hardware

To view a SPRING RATE REFERENCE CHART, please click on the EXTENDED INFORMATION tab.

PART NUMBER: SUS-1116B

• Coil-Over Shock Type Single-adjustable
• Suspension Height Adjustment 0.0-3.0 in. lowered
• Shock Body Material Aluminum
• Shock Body Finish Clear anodized
• Adjustable Valving Yes
• Number of Valving Selections 18
• Extended Length (in) 14.000 in.
• Collapsed Length (in) 10.130 in.
• Upper Mount Stud
• Lower Mount Tie bar
• Internal Design Twin-tube
• Gas Charged No
• Body Diameter (in) 2.000 in.
• Bushing Material Polyurethane
• Bushing Color Black
• Coil-Over Springs Included No
• Recommended Spring Diameter (in) 2.500 in.
• Recommended Spring Length (in) 10 in.
• Adjustable Mounting Bracket Included No
• Hardware Included Yes

Typically, a spring rate between 350 – 450 is used for small blocks and a spring rate between 450 – 550 is used for big block, but your particular circumstance may vary depending on factors such as aluminum versus cast iron componentry (heads, intakes, etc.), adding heavier engine components such as blowers, etc..  The chart below is meant as a reference guide only.  Your needs may vary.

QA1 FRONT SPRINGS RATE REFERENCE CHART

SPRING RATE...................TOTAL WEIGHT ON FRONT WHEELS
350.....................................1200 - 1500 lbs.
450.....................................1600 - 2000 lbs.
550.....................................2000 - 2400 lbs.