|
|
|
|
1967 - 1981 Camaro 7” Great White ® LED Headlamp Manufactured in the USA, Premium Quality
This is our best 7 inch Headlight we offer. Built to preform and last. Proudly made in the USA! Designed, engineered and manufactured in the USA with state-of-the-art optics and LED technology, the 7” Navigator produces a dramatically crisp beam with a wider, more even pattern and colour temperature that closely matches daylight. ADR legal LED drop in replacement for standard round 7” head lamp inserts, the Navigator delivers superior construction quality and extreme durability and features high and low beam functions in the one lamp. Navigator offers - ultimate performance, durability and are built to last a lifetime*. With Peterson’s Limited Lifetime Warranty. Headlamps are UV & impact resistant, hard coated polycarbonate lenses, vacuum metallized reflectors and heavy duty die cast aluminum housings. This headlight been designed for maximum durability and performance. Two required per car, sold as each.
Extended service life and outstanding vibration resistance.Provides separate high and low beam functions. Features:Light Output: Low Beam 1100 Lumens Light Output: High Beam 1650 Lumens Light Source: 2 LED Arrays Watts - Low Beam: 28 Watts - Multi-Volt Watts - High Beam: 29 Watts - Multi-Volt Input Voltage: 9-32V DC Current Draw Amps - Low Beam: 2.1 Amps @ 13.2V DC Current Draw Amps - High Beam: 2.2 Amps @ 13.2V DC Housing Construction: Die Cast Aluminum Lens Construction: Polycarbonate Dimensions: 7" (178mm Dia x 99mm) Ingress Protection: IP67 (Submersible to 1m) Wiring: Supplied Pre-Wired with Built in Driver & H4 Plug Approvals: ECE 24482
PART NUMBER: HDL-248
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Instant light output brighter than traditional halogen lamps
- Produces a super white light temperature similar to daylight
- Ultra Low power consumption less than 2 amps
- Multi-functional high beam & low beam all in one light
- Multi-volt 9-32V DC suited to 12V or 24V vehicles
- 100,000 hour LED life span
- 178mm (7") in diameter
- Heavy duty cast aluminum housing polycarbonate lens
- IP67 water & dust proof
- Fits existing cradle/bucket mounts
- DOT/SAE approved for USA only
- Direct replacement for standard 7 sealed beams
- Supplied with H4 connector to plug into existing vehicle harness
|
|
|
|
|
|
Other Great Parts That You Might Need |
1978 - 1981 Camaro Headlight Adjust Parts Set: Screws, Nuts, and Springs
|
|
1976 - 1981 Camaro Headlight Assembly Retainer Ring, Each, 5964574
|
|
1974 - 1977 Camaro Headlight Adjust Parts Set: Screws, Nuts, and Springs
|
|
1967 - 1975 Camaro Headlight Assembly Retainer Ring, Stainless 1 Inch Wide, Each
|
|
|
|
|
|
|
|
|
|
1974 - 1981 Camaro Headlight Adjust Spring, Each
|
|
1967 - 1973 Camaro Headlight Adjust Spring, Each
|
|
1967 - 1973 Camaro Headlight Adjust Kit with Screws, Nuts, and Springs
|
|
1967 - 1981 Camaro Headlight Assembly Retainer Ring Screws Set, 6 Pieces
|
|
|
|
|
|
|
|
|
|
|
|