1967 - 1981 Camaro Clutch Kit with Pressure Plate, 10.5 Inch, Coarse Spline, Performance

1967 - 1981 RAM Performance HDX Clutch Kit with Pressure Plate, 10.5 Inch COARSE SPLINE

HDX Clutch sets are the performance upgrade for your daily driver / hot rod. Pressure plates feature increased clamp loads and our 200 Series organic clutch disc. 200 series discs use a premium organic facing material that greatly increases rotational strength. RAM HDX clutch kits are ideal for street / strip applications. They produce 30-60 percent more clamping pressure over stock and feature ductile iron, explosion-resistant pressure rings that meet SFI certifications for use in competition. The HDX disc provides the smooth engagement necessary for maximum performance and drivability. A new flywheel or the resurfacing of the existing flywheel is required before installation.

New clutch and pressure plate kit for your 10.5 inch bellhousings. Kit includes clutch disc, matched pressure plate, clutch-alignment tool and throw out release bearing. This clutch is commonly found on all 1967-1981 Camaros. Fits the new reproduction 3858403 and other used original 10.5 inch bellhousings. Please check your clutch and spline size before ordering. Over the years the bellhousing and clutch has probably been changed.

NOTE ~ This is the performance version. It is quite a bit harder to operate than stock replacements. If your left leg is not pretty strong or you foresee a lot of traffic driving, you may want to go with our part # CLU-736

Clutch Size: 10.5"
Spline: 1 1/8 inch diameter with 10 groove coarse spline count.

PART NUMBER: CLU-736HDX