|
|
|
|
1967 - 2002 Camaro Polyurethane Tie Rod Dust Boot Set, Pair
At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! Typically when tie rods are worn, an entirely new tie rod end is need and the additional expense of a suspension alignment is required.
These exclusively engineered Energy Suspension ® boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber boots. These boots have a 5 Point Sealing Action which not only prevents loss of tie rod lubricant, but also inhibits contamination (the major cause of rod wear)!
GIVE YOUR VEHICLE SUSPENSION ADDED DURABILITY!
Order 2 sets to replace both the inner and outer dust boots on your 67 - 02 Camaro!!
PART NUMBER SUS-22B
- Bushings, Tie Rod Dust Boots, 19/32 in. Top, 1 3/8 in. Bottom, Round, Black, Pair
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod!
- Adds durability surpassing most OEM rubber boots.
- Exclusive 5 point sealing action.
- Made of Energy's HYPER-FLEX™ performance polyurethane for added performance and durability.
|
|
|
|
|
|
Other Great Parts That You Might Need |
1967 - 1981 Polyurethane Body Mount Bushing Set with Steel Sleeves, Hardware Included, BLACK
|
|
1982 - 1992 Camaro Tie Rod End, Outer, Each
|
|
1975 - 1979 Camaro Outer Tie Rod End, Each
|
|
1967 - 1969 Polyurethane Upper and Lower Control Arm Bushing Kit For Stock A-Arms
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Camaro Tie Rod End, Outer, Correct OE Style, Each
|
|
1967 - 1969 Camaro Tie Rod End, Inner, Correct OE Style, Each
|
|
|
|
|
|
|
|
|
|
|
|