 |
 |
 |
|
1970 - 1975 Camaro Rocker Panel Molding, Chrome Left Hand, 481540
New, LH driver side 3 INCH wide rocker chrome molding. Includes mounting retainers and hardware. Moldings attach directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. This new LH molding comes with hardware. Replaces GM Part # 481540. Fits 70, 1970, 71, 1971, 72, 1972, 73, 1973, 74, 1974, 75 and 1975 Camaro models.
Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavy up close. A strong 7 on a 1 to 10 scale. Please make sure you can live with these minor imperfections as they are non-refundable.
This left hand drivers side molding includes;
1 = LH 3 Inch Wide Rocker Molding
2 = Long Track Brackets that measure about 23 inches by 1 inch
2 = Phillips Head Screws
6 = Hex Head Mounting Screws
6 = Spring Steel Tension Pointed Clips (BCM-25C)
PART NUMBER: BCM-25
|
|
|
 |
|
 |
| Other Great Parts That You Might Need |
|
1970 - 1981 Camaro Outer Rocker Panel, Full OE Style Left Hand
|
|
1970 - 1981 Camaro Outer Rocker Panel, Full OE Style Right Hand
|
|
1970 - 1973 Camaro Rally Sport Park Light Assembly, LH or RH: Housing, Lens, and Bulb EACH
|
|
1970 - 1975 Camaro Rocker Panel Molding Set, Chrome Replaces 481539 and 481540
|
|
|
|
|
|
|
|
|
|
|
|
|
1970 - 1975 Camaro Rocker Panel Molding, Chrome Right Hand, 481539
|
|
1970 - 1973 Camaro Rally Sport Grilles Set, Pair LH and RH
|
|
1970 - 1981 Front Window Chrome Trim Moldings Kit, Plastic Clips, and Lower Corners
|
|
1970 - 1973 Camaro Rally Sport Front Split Bumpers, Pair LH and RH
|
|
|
|
|
|
|
|
|
|
|
|
|