 |
 |
 |
|
1970 - 1975 Camaro Rocker Panel Molding Set, Chrome, Replaces 481539 and 481540
New, LH and RH, driver and passenger side 3 INCH wide rocker chrome molding set. Includes both sides and mounting retainers / hardware. Moldings attach directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. These new rocker panel chrome moldings come with hardware. Fits 70, 1970, 71, 1971, 72, 1972, 73, 1973, 74, 1974, 75 and 1975 Camaro models. This is sold in a set and replaces GM part#'s 481539 and 481540.
Please Note: There are dimples or imperfections where the stainless rolls over during manufacturing. They look great from 10 feet away but wavy up close. A strong 7 on a 1 to 10 scale. Please make sure you can live with these minor imperfections as they are non-refundable.
This left and right hand set includes;
1 = Left Hand 3 Inch Wide Rocker Molding
1 = Right Hand 3 Inch Wide Rocker Molding
4 = Long Track Brackets that measure about 23 inches by 1 inch
4 = Phillips Head Screws
12 = Hex Head Mounting Screws
12 = Spring Steel Tension Pointed Clips (BCM-25C)
PART NUMBER: BCM-25P
|
|
|
 |
|
 |
| Other Great Parts That You Might Need |
|
|
|
|
1974 Camaro Z28 
