1967 - 1969 Camaro Subframe Brake Hold-Off Check Valve

Home > Model Years > 1967 Camaro Parts >

Alternative Views:

Our Price: $76.44

PART NUMBER: BRC-215

Qty:

Description

1967 - 1969 Camaro Subframe Brake Hold-Off Check Valve

New correct design brake frame splitter block for your 67, 68, or 69 Camaro. Mounts toward the rear of drivers side subframe rail on the inner side. For all cars with two piece front to rear brake lines.

*Note ~ This valve limits the amount of hydraulic pressure, at a controlled rate, to the rear wheels in proportion to the amount of pressure to the front wheels. ... This action prevents the rear brakes from locking up before the full effective braking effort is produced by the front disc brakes.

*Used primarily (but not exclusively) on disc/drum systems, the proportioning valve (also called a "pressure regulator valve" in some GM manuals) is inserted in the rear drum system, mounted to the side of your subframe below the driver's door.

The '67 Chassis Service Manual says it was used on Camaros with air conditioning, and the '69 manual says it was used on Camaros with a 12 bolt rear axle; usage varied, and no precise pattern of options or equipment has been observed that would dictate its presence.

PART NUMBER: BRC-215