 |
 |
 |
|
1967 - 1969 Camaro GM Licensed OE Style Subframe Body Mount & Rad Support Bushings Set with Part Numbers
What makes these bushings a cut above all the other reproductions? How about a lifetime warranty to the original purchaser - Better than OE quality materials - OE appearance - Bushings bonded to sleeve cores as original - First time offered at any quality level with 2" diameter radiator support mounting bushings as original. Manufactured by a QS-9000 and ISO/TS16-944 certified OE supplier. None finer available! Complete set of six bushings and six cushions. LIFETIME WARRANTY. Officially Licensed GM Restoration Parts.
New GM Licensed Correct Factory Style Sub Frame Body Mount and Rad Support Bushings for your 1967, 67, 1968, 68, 1969 and 69 Camaro models. Complete 12 piece kit including all cushions and metal sleeves. Two bushings for the radiator support, two for the front subframe to front toe board area, and two for the rear subframe to body. Replaces GM Part #'s perfectly: Mounts: Rad 3893159 Subframe Front 3928380 Rear 3901361 Cushions: Rad 3893156, Subframe 3914802. Assembly Line Correct Sub frame & radiator core support bushing kit. This is by far the finest quality bushing set available anywhere. Bushing with part# 3901361 x 2 rear sub frame mount bushings #15 in the assembly manual, 3893156 x 2 Radiator core support bushings, #8 in the assembly manual, 3914802 x 4 Sub frame bushing donuts for front & rear Sub frame bushings, #10 in the assembly manual (middle and bottom row in photo on right side. 3893159 x2 radiator core support bushing donuts, #3 in the assembly manual, Order SUS-214 (OE Style) for the Assembly Line Correct mounting bolts, washer, and hardware to install this bushing as original.
You can view an excellent illustration in the 1967, 1968, 1969 Camaro Factory Assembly Manuals under section UPC 1 D1. Applications: 1967-1969 Chevrolet Camaro, 1967-1969 Pontiac Firebird, 1968-1974 Chevy Nova.
*For the hardware set that goes with these, please add either SUS-214 (OE Style) or SUS-215 (Replacement Style).Replaces GM Part #'s perfectly: Mounts: Rad 3893159 Subframe Front 3928380 Rear 3901361 Cushions: Rad 3893156, Subframe 3914802
~~Fits all 67-69 Camaro, 68-72 Nova, and 67-69 Firebird models
PART NUMBER: SUS-244
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- GM Licensed
- Molded Part #'s Like Original
- Correct Sleeves w/ Dark Gray Phosphate Coating Like Originals
- Bushings Bonded to Sleeve Cores As Original
- Diagram for Mounting Locations Included
- Complete Set
- LIFETIME WARRANTY
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
1967 - 1969 Camaro Upper Control A-Arm Rubber Bumper Stopper, Each
|
|
1968 - 1969 Camaro Lower A Arm Control Rubber Bumper, Each
|
|
1967 - 1981 Camaro Subframe Mounting Hole Repair Washer Plates Set, 4 Pieces
|
|
1967 - 1969 Camaro Upper Control A-Arm Shaft Hardware Set w/ Shims
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 - 1972 Camaro Lower Control A Arm Frame Bolts and Nuts Set
|
|
1967 - 1969 Camaro Subframe Mounting Point Repair Plates Set, 6 Pieces for All Points
|
|
1967 - 1981 Camaro Subframe Body Mount Bushing Hardware Set: Bolts, Nuts, and Washers
|
|
1967 - 1981 Camaro Subframe Body Mount Bushing Washer Set Correct OE Style, 4 PCS ( WASHERS ONLY )
|
|
|
|
|
|
|
|
|
|
|
|
|
1967 - 1969 Camaro Factory OE Style Subframe Body Mount Bushing Hardware Set: Bolts, Nuts, and Washers
|
|
1967 - 1969 Camaro Subframe Body Mount & Radiator Support Bushings Set, 12 Pieces
|
|
|
|
|
|
|
|
|
|
|
|
|
Went in good except their instructions are wrong 
