|
|
|
|
1975 - 1981 Camaro 2.5" Stainless Steel Crossflow X-pipe Exhaust System with Catalytic Converters and RacePro Muffler
This is a Header Back Stainless Steel Exhaust Kit for 75, 76, 77, 78, 79, 80, and 81 V8 Camaro models. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed.
This is the first system on the market with a true 'straight thru' flow path. That means that even though there is one muffler there is two completely separate flow paths for each side of the exhaust. There is absolutely no loss of flow thru the muffler. All other systems include a flow path that create turbulence and restricted flow in the muffler. This header back system includes a driveshaft tunnel X crossover kit for maximum ground clearance even on lowered vehicles. Manifold downpipes are available as an option for those that do not have headers. Great for even the highest performance(up to 600hp) applications where ground clearance and oem 'look' is a priority.
Pipes and muffler are 409 stainless steel. This is the last exhaust system you will ever need for your car.
Tips are NOT included with the system. EVT49 is for 'behind the tire' exit. EVT58 for 'out the back' cars. EVT10 splitters (also requires TGF20E) for 76-81 Firebird owners or if you want that look.
Catalytic Converters Included! These EPA compliant catalytic converters are the best in the market in terms of performance, design, and longevity. Expect more power, improved MPG, superior emissions, and sound control.
These converters are a made from a high quality 304 grade stainless steel. The ceramic substrate is a durable factory style design. These converters feature a 2.5” slip fit design with an overall length of 11”. The overall diameter is 4”.
- EPA Compliant
- USA Made
- Stainless Steel Construction
- High Platinum Load
- O2 Bung Equipped
- More Horsepower & Torque
- Increased Fuel Economy
- Lower Emissions
- Better Sound Control
- System INCLUDES Dual Race Pro Muffler In a Single Casing
Please note ~ If your car has exhaust manifolds you will also need the forward down pipes to complete the installation. If you are running headers, then you will not need the additional down pipes.
PART NUMBER FUE-689
Check more out about this item!
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Crossmember-back Exhaust
- Dual Race Pro Muffler In a Single Casing
- Utilizes X-pipe design
- Dual Exit Tailpipes
- 409 Stainless Steel Construction
- 2.5" mandrel bent pipe
- Comes with catalytic converters
- Lifetime Limited Warranty
- Pipes and Muffler are 409 Stainless Steel
|
|
|
|
|
|
Other Great Parts That You Might Need |
1967 - 1968 Camaro Dual Exhaust Tail Pipe Hangers, OE Style
|
|
1967 - 1969 Camaro Chambered Exhaust Tail Pipe Hangers Kit
|
|
1967 - 1981 Camaro Small Block Chevy 2.5” Downpipes with Flanges For Exhaust Manifolds, Stainless Steel, Pair
|
|
1969 Camaro Dual Exhaust Tail Pipe Hangers Set, Not for Chambered Systems
|
|
|
|
|
|
|
|
|
|
1967 - 1981 Camaro Big Block Chevy 2.5” Downpipes with Flanges For Exhaust Manifolds, Stainless Steel
|
|
1967 - 1981 Camaro Exhaust System, Flowmaster American Thunder, Crossflow, Aluminized
|
|
Calyx Exhaust Manifold Dressing Coating
|
|
Exhaust Header Collector Reducers, 2.5 - 3 Inch, Pair
|
|
|
|
|
|
|
|
|
|
|
|