 |
 |
 |
|
1967 - 1969 Camaro G-Force Overdrive 6L80E and 6L90E Slip Yoke Transmission Crossmember
New super heavy duty crossmember for your overdrive transmission. Works great for all 6L80E Slip Yoke and 6L90E Slip Yoke Transmissions. Finished in a black powder coat. Includes new transmission mount, shims and mounting hardware. The best quality O/D crossmember we've found available.
Fits Models: Camaro, Nova, Chevy II, Formula 400, Trans Am, Firebird, Ventura, Omega, Apollo, Skylark. Fits Years: 67-69 F Body, 1968-1974 X Body. This crossmember fits both SBC and BBC engines for the 67-69 F-Body and 68-74 X-Body.
TRA-850 installation notes:
This crossmember is installed with the G Force label facing the rear of the vehicle. A second determining feature is crossmember center tube has a 1/2″ drain slot located on the bottom and on the passenger side next to the hump weldment. The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtains Grade 8 fasteners and washers to compensate.
Finished in a durable black-satin powdercoat paint. Includes new high-strength, Grade #8 mounting hardware.
Fits all 67, 68, and 69 models with a 6L80E and 6L90E Slip Yoke Style transmissions.
PART NUMBER: TRA-850
Distance between crossmember frame holes is approximately 30-3/8". Measure your frame or crossmember to insure proper selection. - This crossmember is installed with the G Force label facing the rear of the vehicle. A second determining feature is crossmember center tube has a 1/2? drain slot located on the bottom and on the passenger side next to the hump weldment.
- The crossmember is installed so that the exhaust clearance humps are closed on the top and open on the bottom.
- To utilize the provided 7/16 hardware it is necessary to enlarge the holes in the frame rails. If the installer chooses to utilize the stock size 3/8 hardware, it is strongly recommended that the installer obtains Grade 8 fasteners and washers to compensate.
- Fits Transmissions: 6L80E Slip Yoke, 6L90E Slip Yoke
- For a proper fit with these transmissions, a Transmission Mount and Shims are included.
- For the 1968-1974 frames, the distance between the crossmember frame mounting holes is 30-3/8". To ensure proper crossmember selection be sure to measure your frame before you order.
Application Since different transmissions can share the same overall lengths as well as other measurements, they can also share some transmission crossmembers. G-Force has grouped the transmissions together that can share the same crossmember. This Crossmember fits the GM-6 Transmission Group: - Hydra-Matic 6L80 transmission (6L80E) - Slip Yoke
- Hydra-Matic 6L90 transmission (6L90E) - Slip Yoke
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Premium Quality
- Black Powder Coat Finish
- Includes a Black Polyurethane Transmission Mount and Shims
- Includes New Mounting Hardware
- Made in the USA
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
|
|
|