 |
 |
 |
|
Electronic Signal to Mechanical Speedometer Cable Drive Adaptor, ECD-200BT
The missing link between your cable-driven speedometer and late model electronic transmission! Measuring 5 1/2 x 3 1/2 x 2, the ECD-200BT allows the use of a mechanical-cable speedometer to be used in conjunction with a modern drivetrain which provides only an electronic output.
36 cable available for GM thread-on or GM clip-on style speedometers. Powerful motor is quiet enough to mount the module inside the cabin.
Waterproofed case can also be mounted under the hood, or even inside a fenderwell.
Bluetooth-enabled to sync with available mobile app for stone-simple set up.
Supplied programming switch and LED readout make setup easy.
For OBD II equipped vehicles, the supplied pigtail will easily plug into the DLC, simplifying the wiring connections.
The Dakota Digital Accessories app is currently available and can be downloaded from the Google Play Store, or Apple App Store. iOS
Android
The ECD-200 uses PID control of the cable speed to provide quick, smooth operation as well as preventing overdriving or damaging the speedometer needle. Consider this the most precise and easiest to use cable-drive unit on the market!
This unit is available for either 5/8" thread-on or clip on style speedometers.
Must choose either:
ECD-200BT-1: GM/Ford thread-on, 5/8
ECD-200BT-2: GM clip-on
PART NUMBER: DAS-566
Check this video out for more information!
The Dakota Digital ECD-200BT is designed operate a cable-driven speedometer from a transmission or ECM electric speed signal or from an OBDII port connection. The supplied cable threads on to one end of the ECD-200 and the wiring harness exits on the other end. Do not use the vehicles original speedometer cable. The module is fully sealed and can be mounted under the dash or in the engine compartment. The module should not be mounted under the vehicle due to the danger of road debris causing damage. The unit is fully adjustable from the comfort of your drivers seat. Setup can also be completed by using the Dakota Digital Accessory app available for IOS or Android devices.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 36 cable included
- Waterproof
- Smaller size for more mounting possibilities
- 5 1/2 x 3 1/2 x 2
- Bluetooth setup and control allows for ultra-simple calibration and customization
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
1967 - 1969 Camaro Speedometer Cable Firewall Grommet
|
|
1967 - 1981 Speedometer Cable Retaining Support Clip, Each
|
|
1968 Camaro Dash Speedometer, Replaces GM 6481843
|
|
1967 - 1969 Speedometer Cable Firewall Hole Filler Plug
|
|
|
|
|
|
|
|
|
|
|
|
|
1969 Camaro Dash Instrument Cluster Gauge, SPEEDOMETER, with Speed Warning, 120 MPH, 6482888
|
|
1969 - 1992 Camaro Speedometer Cable to Gauge Retainer Clip, 6491006
|
|
1970 - 1978 Camaro 150 MPH SPEEDOMETER Dash Instrument Gauge, NEW
|
|
1967 Camaro Dash Instrument Cluster Gauge, SPEEDOMETER Without Speed Warning, 6480794
|
|
|
|
|
|
|
|
|
|
|
|
|
1970 - 1978 Camaro Dash Instrument Cluster Gauge, SPEEDOMETER, 130 MPH, OE Style 8987263, NEW
|
|
|
|
|
|
|
|
|
|
|
|
|
