HushMat Heat and Sound Deadening Floor and Dash Kit, Silver Ultra 20 Piece Damping Pads

Make your Camaro ultra quiet and cool with this Hushmat kit. Vibration Damping & Thermal Insulation Material is a 1/8” thick and 0.47-0.50 lb per square foot pressure-sensitive, constrained-layer damping material which has excellent adhesion for many difficult to-bond-to substrates such as oily steel, automotive E-coat, primers, finishes, laminated and chopper-gun fiberglass and many plastics, including polypropylene. The aluminum foil constraining layer and specially formulated visco-elastic polymer layer combine to give effective vibration damping and outstanding thermal insulating properties over a wide temperature range. HushMat Ultra, through its proprietary chemistry, provides outstanding thermal insulation for hot firewall, trunk floor over the hot exhaust and tunnel applications. Enjoy the Cool, Quiet and Comfortable ride with HushMat.

• Easiest sound deadening & insulation product to install - peel & stick
• Reduces heat & vibration that creates an uncomfortable ride
• Performs from -30 degrees up to 550+ degrees Fahrenheit
• Light weight & super flexible less than 1/8” thick at less than 1/2 pound per square foot
• Adhesion is guaranteed - No alcohol or acetone wash needed; no installation tools required
• Trims easily with standard razor knife or household scissors
• Self-Adhesive peel and stick – no glue required
• Installs in 1/2 the time versus offshore produced brands
• Manufactured in the United States of America
• Outperforms closest competitive brand by over 40%
• Original Equipment Manufacturer approved - Meets or exceeds automotive damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C – Chrysler
• Universal application

Sold in a 39 square foot kit. (20) Sheets 12" x 23" Ultra Damping/Insulating

Part Number: INT-1043

• FEATURES & BENEFITS:

  • HushMat Ultra effectively treats low frequency, resonant noise from 0 to 1,000 Hz
  • Withstands ambient temperatures from -30 degrees up to +550 degrees Fahrenheit
  • Requires no surface cleaning / preparation or heat guns to install
  • No alcohol or acetone wash needed
  • No installation tools required
  • Trims with standard razor knife or household scissors
  • Self Adhesive peel and stick – no secondary glue - adhesion guaranteed
  • Available in Silver or Black Foil
  • Reduces thermal transfer by over 40%
  • Meets or exceeds damping specs GMO149M - General Motors, WSB-M5G58-A1 - Ford and MS-CD 629 Type C - Chrysler

  Easier Installation + Better performance = GREAT VALUE!

  PRODUCT DETAILS:

  HUSHMAT ULTRA is a pressure-sensitive, constrained-layer damper, which has excellent adhesion to many difficult to bond substrates such as oily cold rolled steel, aluminum, steel, fiberglass, automotive coated surfaces, and many plastics including polypropylene. The aluminum foil constraining layer and specially formulated viscoelastic polymer layer combine to give effective vibration damping over a wide temperature range. Ultra is provided in rectangular or square sheets and can be hand-cut for special configurations.

  HUSHMAT ULTRA is temperature resistant and will maintain adhesion through all automotive bake cycles including 288°C (550 degrees F) over-bake conditions. This allows its application at any stage of the production cycle. It can be applied to both pre-painted and top-coated metal surfaces. It is compatible with automotive coatings and will not contaminate spray operations. HUSHMAT ULTRA superior adhesion characteristics provide excellent corrosion resistance.

  The superior adhesive properties of HUSHMAT ULTRA allow it to be used in horizontal, vertical or inverted applications. It has good conformability and can be applied on complex shapes.

  HUSHMAT ULTRA is approved for many automotive specifications. Contact your Hushmat representative for details, and for design and custom application assistance.

  TYPICAL PROPERTIES:

  COLOR:	Polymer - Black Backing – Aluminum Silver or Black
  SPECIFIC GRAVITY:	1.47 (approx. 0.47 pounds per square foot)
  THICKNESS:	1.5mm
  HARDNESS:	6.5 - 9.0mm. ASTM D-5
  R VALUE:	7
  SHELF LIFE:	At least 6 months when stored at 40°C or less
  TEMPERATURE RESISTANCE:	HUSHMAT ULTRA will withstand a bake of 1 hour at 240°C with no deformation, sag, or flow when baked in horizontal, vertical or inverted positions.
  COLD FLEXIBILITY:	Can be bent around 25mm. mandrel at -30°C with no cracking or loss of adhesion.
  FLAMMABILITY:	Tested per FMVSS 302, HUSHMAT ULTRA is self-extinguishing and meets all aspects of the standard.
  SAFETY:	HUSHMAT ULTRA is not considered a hazardous material. Care should be used in handling to avoid cuts from the foil. Gloves are recommended. The Material Safety Data Sheet is available upon request and should be read and understood before using this product.
  PEEL STRENGTH:	Tested in 90° peel at a crosshead speed of 300mm per minute on a 25mm wide test specimen. Average load in Newtons is reported.

  PEEL STRENGTH (N per 25mm width)
  	OILY COLD	OILY GALVANIZED	E-COAT
  SUBSTRATE	ROLLED STEEL*	STEEL*	(ED-11)**
  After 2 Hours	92	92	77
  Heat Aged 2 Weeks at 70 Celsius	91	91	84
  Salt Spray 2 Weeks	83	56	72
  Humidity 2 Weeks at 100% and 38 Celsius	89	84	88
  Environmental Cycle 5 Cycles of the following 17 Hours at -30 Celsius 72 Hours at 70 Celsius 24 Hours in Salt Spray 7 Hours at -30 Celsius 17 Hours in Salt Spray 7 Hours at 70 Celsius 24 Hours in Salt Spray	89	91	78
  * Baked per automotive paint bake schedule - e-coat.
  ** Unbaked

Reduce that aftermarket engine, exhaust drone, road noise, vibration and the noise that disrupts your ride and reduce the heat that comes from engine, headers, exhaust and catalytic converter - with one USA Made material - light weight HushMat Ultra

When driving your vehicle do you feel the heat coming through the firewall, floor & tunnel? Do you hear the road noise and vibration that prevents you from having a phone conversation? - does it drive you crazy? Do you wish you could stop the heat and the noise and enjoy a current model quiet ride on the inside? HushMat is the solution.

Did you know when driving on the highway at 65-70 miles per hour the interior of your vehicle is approaching 80-90 decibels? That is like having a vacuum cleaner or garbage disposal running on your passenger seat! Sounds crazy right? Listen to what 80 decibels sound like:

This happens in virtually every vehicle on the road every day. HushMat is the solution to REDUCE the noise level in your vehicle by up to 15 decibels!

Ever think about driving on the highway and then exiting? At the end of the exit ramp what is the first thing you do? You turn down your radio or music because it was too loud! It had to be that loud on the highway to over come all the noise inside your vehicle. HushMat reduces this noise floor and allows you to hear more music.

Did you also know there is over 200 degrees of heat cooking your firewall and floor pan? That's right - your engine, headers, manifold & exhaust generate tremendous heat that transfers to the metal firewall & floor - this heats up your vehicle interior. This creates a very uncomfortable ride, especially in the summer! This also forces your AC system to work harder to reduce & maintain comfortable temperatures inside your vehicle. HushMat is the solution to reduce thermal transfer into your interior. HushMat's proprietary USA manufactured visco-elastic chemistry dissipates this heat insulating your interior causing less load on your A/C system - making your vehicle significantly cooler. HushMat Ultra is proven in an independent study to lower this temperature by over 40%.

HushMat Ultra - designed for the automotive industry OEM's (Ford, Chrysler, GM, Nissan, Mitsubishi, Toyota and Honda) for over 25 years. HushMat is the only OEM specified and approved sound deadening & thermal insulating material available to the automotive aftermarket.