RFID Push Button Start System for Vehicles with Power Door Locks and Accessories, PBS-II

Get the latest technology for your classic Camaro with this new push button start system.

The Digital Guard Dawg PBS-II Push Button Start system expands your possibilities with 5 programmable output channels to remotely control power locks, shaved doors, power windows and remote trunk release all from a single iTag transmitter. Using advanced RFID technology (Radio Frequency Identification) just like that on found on the world’s finest luxury vehicles, the PBS-II completely eliminates your vehicles ignition key switch and provides proximity controlled automatic operation of your entire Ignition. Simply carry one of the systems digital RFID “iTags” with you. As you come into proximity of your vehicle, the PBS-II verifies your identity, authorizes your ignition and with just the “Push of a Button” your engine roars to life! When you arrive at your destination, another push turns your engine off and you just walk away. 5 remote operated output channels put complete control of all your power accessories right at your fingertips. If you’re building something special and needing one unit that can do it all, the PBS-II is just what you’re looking for!

FITMENT: Pre 1998 vehicles with power accessories.

Must Choose Start Button Color and Button Size (22mm or 25mm Hole Size)
22mm is suggested for most 1967-2002 models for stock location.

Black 25mm with RED is NOT AVAILABLE

Employing the latest technologies and innovations, we design and manufacture keyless ignition systems for cars. Not only do our systems protect, but they provide the ultimate in customer convenience and excitement!

PBS-II Push Button Start System Installation Instructions (PDF)

Part Number: ENC-1351

• The ITags allow you to have control of 2 momentary channels, 2 channels that can be programmed to be either latching or momentary and 1 proximity based channel. All outputs are negative triggers.
• The installation is very straight forward, for basic system functionality it only requires 7 wires. It does require identifying wires and making connections but is very self-explanatory.
• We recommend changing your batteries once a year, depending on use you can expect to get 1-3 years out of your iTag batteries.
• The PBS-Ii comes with one iTag, to add additional iTags please select how many you would like from the drop down.
• The PBS-ii systems will work with diesel vehicles, In the programming features of the PBS-ii you are able to set a starter delay if you need to give your glow plugs a moment to prime.
• Our iTags use a standard CR2032 battery, these can be found at any dealership, retail or hardware store.
• Your iTags can be programmed to as many push button start systems as you want, giving you the ability to only carry 1 iTag with you and hop into which ever vehicle you feel like driving that day.
• The PBS-ii has a programmable feature that will allow you to set up a starter delay to give your fuel pump to prime.
• Each system comes with an owners card that has a 4 digital pin code, on the back of the owners card there are instructions on how to enter the emergency bypass mode, once you are in emergency bypass mode you just enter your 4 digital pin code and the system will allow you to start the vehicle up.
• You can use any momentary 12V button, we can also modify buttons to work with our system, just give us a call at 877-246-5395 and we can assist you with making sure your vehicle has the look you are wanting it to have.
• The iTags use non-volatile memory, meaning that they will never lose their programming if power to either the key fob itself or the module is lost.
• Our unit is a stand-alone piece and will definitely work with your Dakota digital.
• Our system has built in filtering for MSD ignitions, our system will definitely work vehicles equipped with MSD ignition systems.
• Specs:
• Module Size 5.5” X 3” X 1.25”
• Weight 12 oz
• Operating Voltage 12 Volt
• Current Handling 4 x 60A
• Current Max 300A in-rush
• Accessory Circuits

iTAG Transponder

The RFID iTag represents a true innovation in vehicle security & convenience. It will only authorize your Ignition when you are within close range of your vehicle. Each iTag is completely unique with over 6 billion different codes. Each of the iTags™ hidden buttons is able to operate two individual feature channels by sensing the difference between a “Short Push” or a “Long Push”. These four independent selectable feature channels are user programmable (either Latched or Pulse) so they can be used for virtually any option such as Remote Keyless Entry, Shaved Door “Pop” (single/dual), Remote Trunk release, Automatic Window Roll up, Lighting or Video activation or whatever else you can dream up. In addition, the PBS II has a 5th “Proximity Channel” that activates automatically when you approach your vehicle. This channel can be used to activate lighting or any other device you choose. iTags have “dual mode operation” which allows you to select whether the iTag™ operates in Manual or Automatic mode allows you to control what features YOU want to operate at a car show while still keeping your vehicle completely protected. iTags are powered by an easily replaceable lithium battery that lasts over a year. An unlimited number of iTags can be programmed into each system and a single iTag can be programmed to work every vehicle you own.

Five Independent Feature Control Channels

Four channels are user programmable (either Latched or Pulse) and can be used for virtually any option such as Remote Keyless Entry, Shaved Door “Pop” (single/dual), Remote Trunk release, Automatic Window Roll up, Lighting or Video activation, and a 5th “Proximity Channel” that activates automatically when you approach your vehicle, provides endless versatility to create customize operation of whatever you can dream up.

Start Button with LED Status Indicator

PBS Systems come standard with our 22mm Billet style Start Button, It is a top quality / heavy duty cycle switch with an attractive “soft brushed” finish. An Illuminated halo LED ring indicates system status. Switches are pre-wired to a 36″ plug in harness. Available in 3 LED colors; RED, BLUE or GREEN

Advanced System Control Module

The system control module has 60A high current relays right on board, eliminating all unsightly and failure prone external relay wiring. Individually controlled circuits for Starter, Ignition and two separate Accessory circuits allow the system to install into any vehicle. One ACC circuit switches OFF during starter crank (to minimize current draw from components like A/C) and another that stays ON for components such as computers.

Programmable Starter Delay

For vehicles requiring time for fuel to pressurize on other systems to warm up before the engine cranks. The PBS II provides a programmable Start Delay circuit. It allows you to select a delay from the time you press the start button until your starter cranks of up to 7 Seconds.

Built in MSD Filtering

Advanced filtering circuitry removes noise and electronic spikes associated with many high performance ignitions, saving money an time by eliminating the need to buy separate ignition filters.

Full Ignition Switch Functionality

Using brake pedal controlled switching the system fully emulates the functions of a traditional key switch. Want to operate accessories without starting your engine? Just use the Brake to select between different Ignition modes:

“Accessory Only Mode” ( Radio )

“Accessory + Ignition Mode” ( Heating / Fans / Radio )

*** At any time you can go directly to “Start Mode””

Emergency Bypass

Should you ever lose or damaged your iTag™ the system includes a Emergency Backup PIN# Card that will allow you to start your vehicle in a emergency. A 2GO KEYLESS™ exclusive feature!