 |
 |
 |
|
1982 - 1992 Camaro Complete Molded Floor Carpet Set, Passenger and Rear Trunk Hatch Cargo Area with MASS BACKING
Made in the U.S.A.
If you want the best complete front and rear carpet set available for your 3rd generation Camaro, here it is. This molded carpet set is for all 82, 1982, 83, 1983, 84, 1984, 85, 1985, 86, 1986, 87, 1987, 88, 1988, 86, 1989, 90, 1990, 91, 1991, 1992 and 92 Camaro Models. Convertible models with require trimming of the cargo area. This new designed carpet is the best of both worlds. It's has the factory look but with an updated heat and sound deadener pre-applied to the backing!
Note: See Extended Information Tab for Factory Color Options By Year.
Features the correct more full Cut Pile with a ACC Heavy Mass Backing pre-installed. Looks crisp and extra defined once installed. With the Heavy Mass Backing its gives you a much more quiet inside and is much easier to install. Exact factory style rubber heel pad, and dimmer switch grommet included. Strongly recommended for anyone that wants the best for their ride.
~~Don't forget to pick your year 82-84 or 85-92 and your desired color choice.
Mass Backing Features:
- Great sound and heat barrier.
- Increases the overall look of the carpet after installation.
- Approximately 45 mil thick EVA material.
The Best Carpet Available for your 82-92 Camaro on the Market!
*Must select year & color from drop-down menu
Part Number: INT-1155
- READ FULL INSTRUCTIONS BEFORE BEGINNING, Instructions may vary for multi-piece sets
1. Remove new product from box. Lay flat and pop contours back into place. Allow a few hours for product to relax back into proper shape. Check material for accuracy.
2. Compare new and old carpet. (New product may have excess material on outer edges.)
3. In some applications it may be necessary to use old carpet as a template for console cuts.
4. IMPORTANT: Fold new product in half from front to rear. Place in vehicle lining up molded contour to seat risers or any other identifiable starting point on both driver and passenger sides. Once fitted, continue installation.
5. Roll product forward making any cuts needed for brackets, shifters and heater vents etc. while maintaining proper alignment on seat risers or other starting point.
6. Next, cut in center at firewall to allow product to go underneath dash.
7. Continue same procedure for remainder of installation – working your way to outer edges.
8. Once product is properly fitted you are now ready to do the final trimmings on outer edges, seat belts and holes etc.
*Note: Applying adhesive to hold product in place is generally not necessary. If desired, only apply a light brush or spray adhesive after correct dry fit has been obtained.
Third Gen Camaro and Firebird Factory Color Options
C=Camaro
F=Firebird
Note: Russet/4896 has been Discontinued | Model Year | 82 | 83 | 84 | 85 | 86 | 87 | 88 | 89 | 90 | 91 | 92 | DK Blue/ 7130 | C/F | | | | | | | | | | | Med Doeskin/7295 | C/F | C/F | C/F | F | C/F | C/F | F | C/F | | C/F | | DK Briar Brown /7500 | C/F | C/F | C/F | | | | | | | | | Blue/7625 | C/F | C/F | F | | | | | | | | | Black/801 | C/F | C/F | C/F | C/F | C/F | C/F | C/F | C/F | C/F | C/F | C/F | Jade/8042 | C/F | | | | | | | | | | | Silver/8046 | C/F | | | | | | | | C | | | Charcoal/897 | C/F | C/F | C/F | | | | | | | | | Almond/1251 | | | C | C | | F | | | | | | Russet/4896
|
|
|
| C/F
| C/F
|
|
|
|
|
|
| Medium Beige/9777 | | | | C/F | C/F | F | F | C/F | | | F | Flame Red/8801 | | | | C/F | | C/F | C/F | C/F | C/F | C/F | C | Dove Gray/ 877 | | | | C/F | C/F | C/F | C/F | C/F | C/F | C/F | C/F | DK Red/ Carmine/7039 | | | | C/F | C/F | C/F | C/F | C/F | | | | Oxblood/4305 | | | | | F | F | C | | | | | Cognac/9205 | | | | | | | C | C/F | F | | | Maroon/825 | | | | | | | | | C | | |
ACC guarantees all of our products to be free from defects in material and workmanship for a period of one year. (Normal wear from use excluded from this guarantee.) ACC will issue a replacement or credit for any defective carpet sets, except those damaged in shipping.
Please contact our Customer Service Dept. and we will work with ACC to promptly handle your case.
*NOTE: PLEASE INSPECT EACH CARPET SET PRIOR TO INSTALLATION. CARPET SETS CANNOT BE RETURNED AFTER BEING CUT, TRIMMED, GLUED, OR ALTERED IN ANY MANNER.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Best fit, Best feel, Best looks and Best install
- Passenger and Rear Cargo Hatch Complete Set
- Made in the USA!
- Correct Original Style Front and Rear Carpet Set
- Heavy Mass Backing
- Holds Mold and Shape Better
- Correct Heel Pad
- Cutpile Premium Quality Carpet
|
|
|
|
|
|
| Other Great Parts That You Might Need |
|
1982 - 1992 Floor Carpet, Molded Rear Trunk Cargo Hatch Area Set, All Models with MASS BACKING
|
|
1982 - 1992 Camaro Rear Trunk Hatch Area 8 Piece Felt Trim Felt
|
|
1982 - 1984 Camaro Floor Carpet, Complete Molded Passenger and Rear Trunk Hatch Cargo Area Set, Coupe, Standard Backing
|
|
1982 - 1992 Camaro Dash Pad, OE Factory Style
|
|
|
|
|
|
|
|
|
|
|
|
|
1982 - 1984 Floor Carpet, Pre-Molded Passenger Area Set, Standard Backing
|
|
1982 - 1992 Camaro Door Jamb Sill Plates, Choose Color
|
|
1985 - 1992 Floor Carpet, Molded Passenger Area Set, All Models, Standard Backing
|
|
1982 - 1992 Camaro Floor Carpet Heat and Sound Deadening Set
|
|
|
|
|
|
|
|
|
|
|
|
|
1982 - 1984 Trunk Hatch Cargo Area Carpet, Molded Cutpile Material
|
|
1982 - 1992 Camaro Interior Rear Hatch Cargo Panel Trim Screw, Plastic, Colors, Each
|
|
1985 - 1992 Trunk Hatch Cargo Area Carpet, Molded, Cutpile
|
|
1982 - 1992 Door Jamb Sill Plate Screws Set, Black, 10 Pieces
|
|
|
|
|
|
|
|
|
|
|
|
|
1982 - 1992 Camaro Upper Console Housing Assembly, Includes Dash Radio Bezel
|
|
1982 - 1992 Camaro Window Felts Set Inner and Outer Set, 4 Pieces
|
|
|
|
|
|
|
|
|
|
|
|
|